Maven MMA 590 - Slow Set White Methacrylate Adhesive (Plexus MA590 Backup Formula)

Maven MMA 590 - Slow Set 90-110 minutes MMA Marine-Optimized Adhesive - Thick/High Viscosity Black or White1:1 ratio Maven MMA 590 is a two-part methacrylate adhesive suitable for structural bonding of various metals, plastics and composites. MMA 590 is a substitute / backup formula for the Plexus MA590. MMA 590 is stocked in two colors: Black and White. And works particularly well for Marine & Boat assembly & repairs. The product can be used for larger assemblies and for filling larger gaps. This is a 1:1-part methacrylate adhesive with an open time of 90 minutes to 110 minutes and handling strength can be achieved in 300 minutes - 420 minutes. Give excellent bond strength along with good toughness and high impact strength. Highly recommended in marine and other composite assemblies. Please Note: These cartridges are designed to work best with a 50ml or 400ml cartridge Dispenser, respectively. We advise you use a 50ml or 400ml Dispenser for all respective cartridges. If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools or caulking dispenser adapters, as pictured, that you can use for fast small jobs. But the 400ml cartridges really need to use a 400ml Dispenser, they're just too big to effectively use without the dispenser. Key Features 90-110 Min Working Time (30 gm mass) Medium-Set MMA for Craftsman and Industrial uses Recommended for marine and other composite materials High impact strength Structural bonding of a variety of materials Gap filling 0.75mm-15mm (.03in-.60in) Excellent resistance to water and solvents Cured Product Characteristics Color: Black or White, it can be ordered in either color Work life (30 gm mass): 50-70 minutes Handling strength: 300-420 minutes Full cure: 24 hours Mixing Ratio: 1:1 Operating temp: -50F to 250F (-45C to 121C) Properties of uncured material (Resin) Specific Gravity: 1.0 Viscosity@25°C, cP: 120,000 - 180,000 Color Translucent Clear, it can be ordered in either color Properties of uncured material (Activator) Specific Gravity: 0.96 Viscosity@25°C, cP: 150,000 - 200,000 Color: Black or White Mechanical Properties Tensile Strength: 2500-3500 psi Lap Shear Strength, psi: 2000-2500 Modulus, psi: 70,000-120,000 Chemical resistance: Excellent resistant to hydrocarbons, acids and bases; susceptible to polar solvents. Directions of applications Wipe off and degrease the surface to be bonded. Use eye protection and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with the specified work-life of this material and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. (For optimum strength, surface preparation for the metals like sandblast, etching is suggested). Safety and handling Wear eye protection and gloves. Harmful if swallowed. Keep it away from heat, flames. Keep out of reach of children. Once used keep the containers closed. Storage and shelf life Store this product in a tightly closed container in a cool and well-ventilated area. Product should not be frozen. Keep it away from any source of heat. Store the material in between 51℉ to 75℉. Continuous exposure above 75℃ will reduce the shelf life.

• Versatile Adhesive: Maven MMA 590 is a slow-setting white methacrylate adhesive suitable for bonding various materials.
• MMA 590 is a substitute / backup formula for the Plexus MA590.
• Durable Bonding: Once cured, it forms a strong, rigid bond resistant to moisture, chemicals, and temperature fluctuations.
• Wide Application Range: Ideal for bonding metals, plastics, ceramics, concrete, and other porous or non-porous substrates.
• 90-110 Min Working Time (30 gm mass)
• Recommended for marine and other composite materials
• High impact strength
• Operating temp: -50F to 250F (-45C to 121C)